MakeMendel PlusBot 2.0

More InfoMakeMendel PlusBot 2.0


$11,499.00MSRP
Fused Filament FabricationPrinting Process
X:220mm, Y:220mm, Z:165mmAxis Length
1Print Colors/Extruders
100 micronPrint Resolution
30mm/s - 60mm/sPrint Speed
250° CExtruder Temp
110° CPrint Bed Temp
12VOperating Voltage
1.75mmFilament Size

PLA ABS
Print Materials


Proprietary Filament
Assembled
Auto Leveling
LCD Display
Standalone Printing
Print via WiFi
Open Source
RepRap Variant
12kgMachine Weight

About MakeMendel PlusBot 2.0

From MakeMendel:
PlusBot is a fully working 3D Printer (build size 22 x 22 x 16.5 cm).

  • Metal Body
  • Highly compact design
  • Filament spool fits inside the Printer Body
  • 100 Micron print layer.
  • Nozzle diameter of 0.4mm.
  • Smart LCD support allows SD card printing.
  • No more PC dependencies.
Technical Specification :
• Machine size: 450 x 350 x 370mm
• Build size: 220 x 220 x 165mm (LxWxH)
• Nozzle Diameter : 0.4mm  
• Layer Thickness : 0.1 mm
• Speed (mm/s) : 60
• Positioning Precision : 27 microns
• Input Format : STL
• Technology : FFF (Fused Filament Fabrication)
• Software : Pronterface (Open Source)
• System Compatibility : Windows 7, Windows 8, Windows Vista, Linux
• Power Supply : 20A SMPS Power Supply,250W
• Weight : 12 Kg

Features of PlusBot 3D Printer :
1. Fully Enclosed Metal Body
2. Filament Spool fits inside the Printer Body
3. LCD Controller Support
4. Spring PrintBed Adjustment.
5. ACME Lead screw with nut.
6. It uses high quality linear motion guide.
7. Mechanically more Stable Compact  design.
8. PrintrBoard REV D and Power Supply are placed at the bottom to give clean and neat look.
9. Self locking design with accurate and easy belt placement.
10. Large build volume with easy accesibility.
11. Integrated Power supply for both PrintrBoard and HeatBed.
12. Extruder is designed for easy filament changing.

This complete PlusBot 3D Printer contains :
•  PrintrBoard Electronics – with presoldered endstops with molex connectors and high temperature heat cables for  connecting Heater and Thermistor
•  All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc
• All Metal sheets (Side plates, Bottom plate, Top plate, Middle plate, Y axis support, Extruder base, Extruder motor plate, Heated printbed)
•  High Precision Ball Screw for Z Axis and Ball nut (255mm)
•  Hard Chrome plated Smooth rods (333mm)
•  4 Stepper Motors – with presoldered Molex connectors
•  MK7 Drive Gear - for direct drive on motor shaft (5mm inner diameter)
•  Pre-assembled J-Hotend, including G550 Thermistor, Catridge Heater, Cooling fan etc
•  Kapton tape 15mm (Insulation of Thermistor legs)
•  Kapton tape 50mm (To print on)
•  High Quality PCB Heatbed (214x214 mm)
•  Cooling paste (To use between Printbed and Heater blocks)
•  PTFE strain-relief
•  GT2 belts and pulleys
•  Power Supply 350W, Input: AC 100-240V, 50-60Hz, 1.3A, Output: DC 12V, 20A
•  USB and Power supply cables
•  2GB Micro SD Card
•  Extras such as Endstops, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.

Comments (
0
)




Printcisely™ 3D Printing Community
Printcisely™ 3D Printing Community

Comment

You must be logged in to comment.

Click Here To Login



Close